Part number 1135GB
Plough bolt M11x1,5x35 with hexagon nut- Diameter11 mm
- Thread pitch1.5 mm
- Length35 mm
13,00 krexcl. VAT
Choose optionsSpare parts
Part number 35.0160
Use this information as a guide. Check the OEM number, machine model and dimensions before ordering.
| Property | Value |
|---|---|
| Number of mounting holes | 9 |
| Weight | 20.6 kg |
Dimensions and visible features read from the product drawings and images.
| Property | Value |
|---|---|
| Antal synliga hålhela skivans hålmönster | 9 runda hålCounted in the imageView drawing |
| Property | Value |
|---|---|
| Ytterkonturskivans ytterkontur | Svängd överkant, avsmalnande nedre delVisual observationView drawing |
Original reference
Use this information as a guide. Check the OEM number, machine model and dimensions before ordering.
Rear moldboard section TRIPLEX - right
Part number: 35.0160.
Supplier specifications. Dimensions, symbols and stated units are retained from the source.
Assembly instructions: To avoid damage from stresses or cracks in the components, all bolts must be tightened alternately when replacing mouldboards and mouldboard strips. Use damping washers to compensate for dimensional tolerances in the mouldboards and their front sections. These prevent uneven stresses and help prevent cracks in the material. Do not use pneumatic tools to tighten bolts and nuts, as they can damage the wearing part (stress cracks).
Part number 1135GB
Plough bolt M11x1,5x35 with hexagon nut13,00 krexcl. VAT
Choose optionsPart number 139021P.1
Damper washer Ø37x3xØ13 DIN 9021 A13 (Polyamide) self-adhesive10,00 krexcl. VAT
Choose optionsPart number U48163EPDM
Damper washer Ø48x3xØ16 - EPDM self-adhesive4,00 krexcl. VAT
Choose options