Part number 1245810
Plough bolt DIN608 M12x1,75x45 and hexagon nut- Diameter12 mm
- Thread pitch1.75 mm
- Length45 mm
6,00 krexcl. VAT
Choose optionsSpare parts
Part number 54.0007
Use this information as a guide. Check the OEM number, machine model and dimensions before ordering.
| Property | Value |
|---|---|
| Weight | 18.2 kg |
Original reference
Use this information as a guide. Check the OEM number, machine model and dimensions before ordering.
Rear moldboard section - left
Part number: 54.0007.
Supplier specifications. Dimensions, symbols and stated units are retained from the source.
Assembly instructions: To avoid damage from stresses or cracks in the components, all bolts must be tightened alternately when replacing mouldboards and mouldboard strips. Use damping washers to compensate for dimensional tolerances in the mouldboards and their front sections. These prevent uneven stresses and help prevent cracks in the material. Do not use pneumatic tools to tighten bolts and nuts, as they can damage the wearing part (stress cracks).
Part number 1245810
Plough bolt DIN608 M12x1,75x45 and hexagon nut6,00 krexcl. VAT
Choose optionsPart number 139021P.1
Damper washer Ø37x3xØ13 DIN 9021 A13 (Polyamide) self-adhesive7,00 krexcl. VAT
Choose optionsPart number U48163EPDM
Damper washer Ø48x3xØ16 - EPDM self-adhesive3,00 krexcl. VAT
Choose options